EMT Practice Test

1. Question Content...

---

Question1: Your customer wants to use HPE OneView to update firmware for a new HPE BladeSystem enclosures.
Which HPE OneView license is required?

Question2: DRAG DROP
Match the correct redundancy level or use to the appropriate RAID level.
Select and Place:

Question3: What do you need to enable directory service authentication for iLO in HPE ProLiant Gen10 servers?

Question4: What should you use to validate a supported HBA firmware for connecting to an HPE 3PAR array?

Question5: A customer needs a tool that will allow them to mount virtual media to multiple HPE ProLiant BL systems at the same time.
What should you recommend to this customer?

Question6: Which benefit is provided by DDR4 memory?

Question7: A customer needs to ensure that all data is removed and restore the system to a default state before they transfer their equipment to the new company.
What should the customer do to accomplish this task?

Question8: What is a new feature in gen10 ProLiant servers?

Question9: A customer with a DL380 Gen 10 server uses an HPE Smart Array controller with a 96 WATT Smart Storage Battery. They want to add 16 GB NVDIMMS in the remaining memory slots. They are concerned about retaining data if a power outage occurs.
What can you explain to them about the Smart Storage Battery configuration to address their concerns?

Question10: After the iLO has been discovered, an administrator is unable to perform group firmware updates to their DL380 Gen10 server.
What should the administrator check to diagnose the problem? (Select two.)

Question11: During the ProLiant Gen10 implementation process you need to ensure that HPE Smart Array controller and NVDIMM memory will have backup power in case of power outage.
Which component do you need to install?

Question12: A customer has experienced an ECC memory event on a critical server while away from the office.
Which HPE cloud-based portal provides the ability to easily track service for future events for the host and the support case raised?

Question13: What does the HPE Apollo kl20 server support that makes it appropriate for HPC clusters?

Question14: A customer has a requirement change where prior to decommissioning a server they must perform a secure erase of the server.
Which iLO license should you include in the new proposal for server hard ware going forward?

Question15: A customer is concerned about managing an HPE Synergy platform.
Which management component is required?

Question16: DRAG DROP
Match the HPE ProLiant Gen10 servers to the intended workload.
Select and Place:

Question17: Your customer is concerned about the possibility of an attack via hard drive firmware exploits against their server infrastructure.
Which new HPE ProLiant Gen10 technology protests against these attacks?

Question18: You are troubleshooting an issue with a ProLiant Service and need to revert to the initial configuration.
During the process, you forget some of the previous configuration changes made.
Which HPE tool can you use to recall all the configuration changes made?

Question19: A customer needs a VSA deployment.
What do you need to verify within the customer environment prior to deployment?

Question20: During HPE BladeSystem implementation, you need to update firmware of the Virtual Connect modules installed in this enclosure. This enclosure is not managed by HPE OneView.
Which tool can be used to update firmware in VC modules?

Question21: A customer needs to manually configure a logical drive for an HPE Synergy compute module using drives presented from a D3940 Storage Module.
Which tool can be used to complete this task?

Question22: A customer needs a process by which they can communicate with their equipment using:
based on an open industry-standard

provides a programmable interface that uses a lightweight data model

Which methodology should the customer use?

Question23: A customer is evaluating HPE Gen10 ProLiant server options. They want to test the ability to erase all user data so that it is irrecoverable.
Which license option will they need?

Question24: What HPE ProLiant server family is purpose built for object storage solutions?

Question25: A customer wants to evaluate the new feature in iLO5 that provides the ability to permanently erase all data on a server.
What iLO5 license will the customer require for this proof of concept (PoC)?

Question26: A customer has a c7000 enclosure running a mix of G7, Gen8, and Gen9 servers. They are decommissioning their G7 servers and plan to replace them with Gen10 servers.
Which Gen10 server is the most appropriate replacement?

Question27: A customer is looking to purchase some new servers for their environment. They need to use a free service tool themselves to calculate the cost of the servers.
Which tool meets the customer's needs?

Question28: Which customer need would require an iLO Advanced license with an HPE ProLiant server?

Question29: DRAG DROP
Match each HPE ProLiant server to its correct definition.
Select and Place:

Question30: A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer's requirements?

Question31: A customer needs a ProLiant tower-based solution for their five remote offices.
Which ProLiant server family should you recommend?

Question32: Which key differentiator is new to the Gen10 ProLiant servers?

Question33: A customer needs the perform rapid checkpoint and restores of the data on their data analytics database.
What questions should you ask to determine whether to deploy HPE Scalable Persistent Memory or HPE NVDIMMs to meet their requirements? (Select two.)

Question34: A customer needs a RAID storage solution with the most storage space available that also provides fault tolerance against potential disk driver failures. The existing customer environment has a server with 8 SAS disk drives installed.
Which RAID level should the customer use?

Question35: A customer has the following requirements:
5TB of local storage to host a 3TB application

iL05 Service Port to download AHS logs & remote console

You propose the following solution:
3x - HPE ProLiant DL380 Gen9

6x - HPE 1TB SATA 6G Midline 7.2 SFF (per server)

What must be changed in your proposal to meet all of the customer requirements?

Question36: A customer experiences high response times to their Windows 2016 SQL database that exists on a ProLiant ML 350 Gen10 server. The customer needs to archive the lowest possible disk I/O response times.
Which HPE solutions should you recommend?

Question37: You need to enable Insight Remote for some HPE ProLiant DL servers.
Which HPE tool can be used for this purpose?

Question38: What are benefits of HPE Scalable Persistent Memory? (Select two.)

Question39: A customer needs to purchase a new Synergy frame now and add two more frames and quarter to expand the first Logical Enclosure.
Which feature allows the customer to add frames without downtime?

Question40: HOTSPOT
A customer has received an alert of a component failure.
Where would the customer be able to confirm which event was logged from the iLO 5 overview screen?
Hot Area:

Question41: A cost-conscious health care customer is considering Gen10 server solutions to adhere to security mandates.
Which security features should the customer test with an iLO5 standard license? (Select two.)

Question42: What is a function of a c7000 Onboard Administrator module?

Question43: How can you streamline the BIOS setting choices during initial installation of an HPE ProLiant DL380 Gen10 server to meet customer needs?

Question44: A customer needs to perform detailed inventory reporting as part a multi-server PoC.
What must you include as part of the solution?

Question45: A customer has the following requirements:
server remote control via virtual KVM

5TB of local storage to host a 3TB application

maximize read/write performance for the customer application

You propose the following solution:
3x - HPE ProLiant DL380 Gen10

6x - HPE 1 TB SATA 6G Midline 7.2K SFF (per server)

1x - HPE 400GB SATA 6G Write Intensive SFF (per server)

What is the minimum HPE software license required to meet all of the customer requirements?

Question46: A customer has ten c7000 enclosures equipped with Gen8 servers and Virtual Connect FlexFabric modules. The servers are monitored by HPE Systems Insight Manager (SIM). The customer plans to add three additional enclosures with FlexFabric modules and GEN10 servers and standardize management using HPE OneView.
How should they implement the new management system?

Question47: HOTSPOT
Support asks a customer to send them a support log of the server, to be attached to the customer's case.
From the iLO 5 Overview screen, click on the tab that the customer should use to complete support's request.
Hot Area:

Question48: When selecting drives for a high performance application, which advantage do Solid State Drives provide over Hard Disk Drives?

Question49: In HPE Smart Storage Administrator, what does the Wear Gauge parameter describe?

Question50: A customer needs to deploy an operating system for a ProLiant DL Gen10 server.
Which HPE tool can be used to complete this task?

Question51: A customer wants to migrate their existing datacenter operations from 2U DL380 G7 servers to a 1U Gen10 server with equivalent sockets available.

Question52: DRAG DROP
Match the SSD drive type to the intended workload.
Select and Place:

Question53: Which technology provides the lowest latency and high bandwidth within high-performance environment?

Question54: An administrator in unable to share the iLO graphic console on a DL380 Gen10 server with another administrator.
What should the administrator check first to diagnose the problem?

Question55: A customer uses HPE Smart Update Manager for firmware and software driver updates. They want to simplify that process by grouping servers that should be updated together.
What can you propose to complete this task?